Heating
Showing 1–15 of 55 results
-
Chimney System, Heating
Cheminee Lining Freestanding Stacks
- Factory-welded joints provide strength, and avoid costly third-party welding
- Available in carbon steel, COR-TEN® steel or stainless steel configurations, as required by your installation’s needs
- High-temperature insulation provides protection from the extreme heat associated with exhaust stacks
- Metal jacket is available as an option when required
- Many options:
- Single structural shell stack
- Cylindrical double wall stack – inner structural shell insulation and outer metal jacket
- Cylindrical double wall stack – outer structural shell with air space, insulation and steel lining
- Cylindrical refractory-lined freestanding stack – outer structural shell with refractory lining
SKU: n/a - Factory-welded joints provide strength, and avoid costly third-party welding
-
Chimney System, Heating
Cheminee Lining Prefabricated Exhaust Systems
- Installation ready exhaust systems
- Male/female jointing system reducing installation time by 40%
- Many options:
- Single stack or lilner,
- 1’’, 2’’ air insulation double wall stack
- 1’’, 2’’ ceramic fiber insulation double wall stack
- 1’’, 2’’, 4’’ mineral fiber insulation double wall stack
- Special gas vents (S636, AL29-4C) up to 48’’ diameter
- Full range of accessories, including elbows, fittings, guides and supports
- Laser welding
- Grease duct products
- UL/ULc listed
SKU: n/a -
Chimney System, Heating
Enervex CASI
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by an inline power venter installed inside a building
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
SS316L and aluminum impeller for use with Category I, II, III and IV appliances (condensing and noncondensing)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly designSKU: n/a -
Chimney System, Heating
Enervex CASV
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by a chimney fan on the exterior of the building
Extremely low noise level
Priority Operation Function and Bearing Cycle
Activation Interlocks 6 appliances (standard) or as many as necessary with add-on relay boards
Cast aluminum chimney fan and impeller for use with Category I, II, III and IV appliances (condensing and non-condensing)
Spark-resistant construction with high-temperature TEFC-motor with a Class H temperature rating, direct drive and true variable speed (inverter-duty)
Maintenance free and service-friendly designSKU: n/a -
Chimney System, Heating
Enervex MCAS
Demand controlled combustion or make-up air supply system
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Easy programming of essential functions (80 parameters are programmable for customized solutions)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly designSKU: n/a -
Chimney System, Heating
Enervex MODS
Demand controlled exhaust system that’s designed for buildings that experience excessive chimney draft
Full modulation and 100% over-draft control
Integrated safety system with Proven Draft function, over-pressure cut-out switch and operation verification
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Multi-blade damper for fast and accurate draft control
Fast-acting, direct drive actuator with brushless motor
Maintenance free and service-friendly design, the MODS System can be combined with a CASV or CASI and an MCAS systemSKU: n/a -
Chimney System, Heating
Enervex PowerStack Chimney Duct System
Industry-only multi-use chimney system with 9 UL listings
Only chimney system listed for use with Category I, II, III and IV appliances
Material Inner Liner: 316L-PCM Stainless Steel
Outer Case: 304 Stainless Steel Insulation Insulfrax 8.14 lbs/cu.ft (128 kg/m3)
Max. Pressure : 60 inWG (14945 Pa)
Max. Temperature1400°F (760°C) per UL2561
Warranty1-Year Warranty / Extended 15-Year Warranty
5-Year Performance and Leakage Guarantee
SKU: n/a -
Chimney System, Heating
Enervex UVS Ultimate Venting System
PowerStack Chimney System
Flexible, one-stop design eliminates guesswork
Mechanical Draft System (fan-based)
Modulating Overdraft Control System (damper-based)
Modulating Combustion Air Supply System Economizer (Vortex Heat Recovery System)
Guaranteed fit for all parts & components
Fit for any type of building, application or applianceSKU: n/a -
Heat Recovery Economizers, Heating
Enervex VHX
Heat recovery center from 1000 MBTU to 33 000 MBTU
Stack economizers and heat exchangers
Integrated modulating bypass damper
Modular heat exchanger concept
Stainless steel housing and heat exchanger (316L)
Condensing or non-condensing applications
Single or multiple boilers
Vertical or horizontal installation
Forced draft or atmospheric boilersSKU: n/a -
Heating, Hydronic Boilers, Non-Condensing Boilers
Evolv HTHW Series High Temperature Hot Water Boiler
Heating, Hydronic Boilers, Non-Condensing BoilersEvolv HTHW Series High Temperature Hot Water Boiler
Heavy gauge steel with rugged construction
5 pass bent tube boiler with standard efficiency of 81%
Burner (low Nox burner over 10 MMBTU/H) with modulating control up to 10:1 turndown ratio
Different Fuel type option : Natural Gas, Oil #2, Propane
Temperature differentials of up to 150°F across the boiler
Burner management (linkageless), display, PID control
Standard equipment: Pressure gauge, thermometer, LWCO, relief valve, aquastats.
Warranty of one (1) year from start-up or 18 months from shipping day
Warranty of twenty-five (25) years from shipping days due to thermal shock damage and high temperature differential operation
Optionnal Coil type set-up & low water volume set-up
SKU: n/a -
Heating, Steam Boilers
Evolv S Series Steam Boiler
Heavy gauge steel with rugged construction
5 pass bent tube boiler with standard efficiency of 81%
Burner (low Nox burner over 10 MMBTU/H) with modulating control up to 10:1 turndown ratio
Different Fuel type option : Natural Gas, Oil #2, Propane
Cold start
Burner management (linkageless), display, PID control
Standard equipment: Pressure gauge, thermometer, LWCO, relief valve, aquastats.
Warranty of one (1) year from start-up or 18 months from shipping day
Warranty of twenty-five (25) years from shipping days due to thermal shock damage and thermal expansion and contraction due to cold start
Different water level control optionsSKU: n/a -
Heating, Hydronic Boilers, Non-Condensing Boilers
Evolv W Series Hot Water Boiler
Heavy gauge steel with rugged construction
5 pass bent tube boiler with standard efficiency of 81%
Burner (low Nox burner over 10 MMBTU/H) with modulating control up to 10:1 turndown ratio
Different Fuel type option : Natural Gas, Oil #2, Propane
Temperature differentials of up to 150°F across the boiler
Burner management (linkageless), display, PID control
Standard equipment: Pressure gauge, thermometer, LWCO, relief valve, aquastats.
Cold start
Warranty of one (1) year from start-up or 18 months from shipping day
Warranty of twenty-five (25) years from shipping days due to thermal shock damage and high temperature differential operation
Optional Coil type set-up & low water volume set-up
SKU: n/a -
Heating, Thermal Fluid Boilers
Fulton A-Model
Vertical Design
Heaters are Built and Tested to ASME Code
207,000 BTU/Hr to 1,736,000 BTU/Hr Output
Operating Temperatures to 600° F
Gas or Oil-Fired Burners, On/Off or Modulating
Low Emission Gas Burners are Available
Customized Controls Available
SKU: n/a -
Heating, Thermal Fluid Boilers
Fulton Alliance-Model
Available from 2.4 MBTU/hr to 20MBTU/hr output
Maximum operating temperatures to 650°F
Compact Horizontal 3-Pass Design
Modulating Gas, Oil or Dual Fuel Burners
Low Emission Gas Burners
Alternative Fuel Capabilities
Customized Controls Available
Built and Stamped Per ASME CodeSKU: n/a -