Chimney System
Showing all 8 results
- Chimney System, Heating
Cheminee Lining Freestanding Stacks
- Factory-welded joints provide strength, and avoid costly third-party welding
- Available in carbon steel, COR-TEN® steel or stainless steel configurations, as required by your installation’s needs
- High-temperature insulation provides protection from the extreme heat associated with exhaust stacks
- Metal jacket is available as an option when required
- Many options:
- Single structural shell stack
- Cylindrical double wall stack – inner structural shell insulation and outer metal jacket
- Cylindrical double wall stack – outer structural shell with air space, insulation and steel lining
- Cylindrical refractory-lined freestanding stack – outer structural shell with refractory lining
SKU: n/a - Factory-welded joints provide strength, and avoid costly third-party welding
- Chimney System, Heating
Cheminee Lining Prefabricated Exhaust Systems
- Installation ready exhaust systems
- Male/female jointing system reducing installation time by 40%
- Many options:
- Single stack or lilner,
- 1’’, 2’’ air insulation double wall stack
- 1’’, 2’’ ceramic fiber insulation double wall stack
- 1’’, 2’’, 4’’ mineral fiber insulation double wall stack
- Special gas vents (S636, AL29-4C) up to 48’’ diameter
- Full range of accessories, including elbows, fittings, guides and supports
- Laser welding
- Grease duct products
- UL/ULc listed
SKU: n/a - Chimney System, Heating
Enervex CASI
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by an inline power venter installed inside a building
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
SS316L and aluminum impeller for use with Category I, II, III and IV appliances (condensing and noncondensing)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly designSKU: n/a - Chimney System, Heating
Enervex CASV
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by a chimney fan on the exterior of the building
Extremely low noise level
Priority Operation Function and Bearing Cycle
Activation Interlocks 6 appliances (standard) or as many as necessary with add-on relay boards
Cast aluminum chimney fan and impeller for use with Category I, II, III and IV appliances (condensing and non-condensing)
Spark-resistant construction with high-temperature TEFC-motor with a Class H temperature rating, direct drive and true variable speed (inverter-duty)
Maintenance free and service-friendly designSKU: n/a - Chimney System, Heating
Enervex MCAS
Demand controlled combustion or make-up air supply system
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Easy programming of essential functions (80 parameters are programmable for customized solutions)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly designSKU: n/a - Chimney System, Heating
Enervex MODS
Demand controlled exhaust system that’s designed for buildings that experience excessive chimney draft
Full modulation and 100% over-draft control
Integrated safety system with Proven Draft function, over-pressure cut-out switch and operation verification
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Multi-blade damper for fast and accurate draft control
Fast-acting, direct drive actuator with brushless motor
Maintenance free and service-friendly design, the MODS System can be combined with a CASV or CASI and an MCAS systemSKU: n/a - Chimney System, Heating
Enervex PowerStack Chimney Duct System
Industry-only multi-use chimney system with 9 UL listings
Only chimney system listed for use with Category I, II, III and IV appliances
Material Inner Liner: 316L-PCM Stainless Steel
Outer Case: 304 Stainless Steel Insulation Insulfrax 8.14 lbs/cu.ft (128 kg/m3)
Max. Pressure : 60 inWG (14945 Pa)
Max. Temperature1400°F (760°C) per UL2561
Warranty1-Year Warranty / Extended 15-Year Warranty
5-Year Performance and Leakage Guarantee
SKU: n/a - Chimney System, Heating
Enervex UVS Ultimate Venting System
PowerStack Chimney System
Flexible, one-stop design eliminates guesswork
Mechanical Draft System (fan-based)
Modulating Overdraft Control System (damper-based)
Modulating Combustion Air Supply System Economizer (Vortex Heat Recovery System)
Guaranteed fit for all parts & components
Fit for any type of building, application or applianceSKU: n/a
- Chimney System, Heating
Cheminee Lining Freestanding Stacks
- Factory-welded joints provide strength, and avoid costly third-party welding
- Available in carbon steel, COR-TEN® steel or stainless steel configurations, as required by your installation’s needs
- High-temperature insulation provides protection from the extreme heat associated with exhaust stacks
- Metal jacket is available as an option when required
- Many options:
- Single structural shell stack
- Cylindrical double wall stack – inner structural shell insulation and outer metal jacket
- Cylindrical double wall stack – outer structural shell with air space, insulation and steel lining
- Cylindrical refractory-lined freestanding stack – outer structural shell with refractory lining
- Factory-welded joints provide strength, and avoid costly third-party welding
- Chimney System, Heating
Cheminee Lining Prefabricated Exhaust Systems
- Installation ready exhaust systems
- Male/female jointing system reducing installation time by 40%
- Many options:
- Single stack or lilner,
- 1’’, 2’’ air insulation double wall stack
- 1’’, 2’’ ceramic fiber insulation double wall stack
- 1’’, 2’’, 4’’ mineral fiber insulation double wall stack
- Special gas vents (S636, AL29-4C) up to 48’’ diameter
- Full range of accessories, including elbows, fittings, guides and supports
- Laser welding
- Grease duct products
- UL/ULc listed
- Chimney System, Heating
Enervex CASI
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by an inline power venter installed inside a building
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
SS316L and aluminum impeller for use with Category I, II, III and IV appliances (condensing and noncondensing)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly design - Chimney System, Heating
Enervex CASV
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by a chimney fan on the exterior of the building
Extremely low noise level
Priority Operation Function and Bearing Cycle
Activation Interlocks 6 appliances (standard) or as many as necessary with add-on relay boards
Cast aluminum chimney fan and impeller for use with Category I, II, III and IV appliances (condensing and non-condensing)
Spark-resistant construction with high-temperature TEFC-motor with a Class H temperature rating, direct drive and true variable speed (inverter-duty)
Maintenance free and service-friendly design - Chimney System, Heating
Enervex MCAS
Demand controlled combustion or make-up air supply system
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Easy programming of essential functions (80 parameters are programmable for customized solutions)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly design - Chimney System, Heating
Enervex MODS
Demand controlled exhaust system that’s designed for buildings that experience excessive chimney draft
Full modulation and 100% over-draft control
Integrated safety system with Proven Draft function, over-pressure cut-out switch and operation verification
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Multi-blade damper for fast and accurate draft control
Fast-acting, direct drive actuator with brushless motor
Maintenance free and service-friendly design, the MODS System can be combined with a CASV or CASI and an MCAS system - Chimney System, Heating
Enervex PowerStack Chimney Duct System
Industry-only multi-use chimney system with 9 UL listings
Only chimney system listed for use with Category I, II, III and IV appliances
Material Inner Liner: 316L-PCM Stainless Steel
Outer Case: 304 Stainless Steel Insulation Insulfrax 8.14 lbs/cu.ft (128 kg/m3)
Max. Pressure : 60 inWG (14945 Pa)
Max. Temperature1400°F (760°C) per UL2561
Warranty1-Year Warranty / Extended 15-Year Warranty
5-Year Performance and Leakage Guarantee
- Chimney System, Heating
Enervex UVS Ultimate Venting System
PowerStack Chimney System
Flexible, one-stop design eliminates guesswork
Mechanical Draft System (fan-based)
Modulating Overdraft Control System (damper-based)
Modulating Combustion Air Supply System Economizer (Vortex Heat Recovery System)
Guaranteed fit for all parts & components
Fit for any type of building, application or appliance
- Chimney System, Heating
Cheminee Lining Freestanding Stacks
- Factory-welded joints provide strength, and avoid costly third-party welding
- Available in carbon steel, COR-TEN® steel or stainless steel configurations, as required by your installation’s needs
- High-temperature insulation provides protection from the extreme heat associated with exhaust stacks
- Metal jacket is available as an option when required
- Many options:
- Single structural shell stack
- Cylindrical double wall stack – inner structural shell insulation and outer metal jacket
- Cylindrical double wall stack – outer structural shell with air space, insulation and steel lining
- Cylindrical refractory-lined freestanding stack – outer structural shell with refractory lining
- Factory-welded joints provide strength, and avoid costly third-party welding
- Chimney System, Heating
Cheminee Lining Prefabricated Exhaust Systems
- Installation ready exhaust systems
- Male/female jointing system reducing installation time by 40%
- Many options:
- Single stack or lilner,
- 1’’, 2’’ air insulation double wall stack
- 1’’, 2’’ ceramic fiber insulation double wall stack
- 1’’, 2’’, 4’’ mineral fiber insulation double wall stack
- Special gas vents (S636, AL29-4C) up to 48’’ diameter
- Full range of accessories, including elbows, fittings, guides and supports
- Laser welding
- Grease duct products
- UL/ULc listed
- Chimney System, Heating
Enervex CASI
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by an inline power venter installed inside a building
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
SS316L and aluminum impeller for use with Category I, II, III and IV appliances (condensing and noncondensing)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly design - Chimney System, Heating
Enervex CASV
Demand controlled exhaust system designed for commercial boilers and water heaters in buildings where the exhaust is powered by a chimney fan on the exterior of the building
Extremely low noise level
Priority Operation Function and Bearing Cycle
Activation Interlocks 6 appliances (standard) or as many as necessary with add-on relay boards
Cast aluminum chimney fan and impeller for use with Category I, II, III and IV appliances (condensing and non-condensing)
Spark-resistant construction with high-temperature TEFC-motor with a Class H temperature rating, direct drive and true variable speed (inverter-duty)
Maintenance free and service-friendly design - Chimney System, Heating
Enervex MCAS
Demand controlled combustion or make-up air supply system
Extremely low noise level
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Easy programming of essential functions (80 parameters are programmable for customized solutions)
Spark-resistant construction with TEFC-motor with direct drive and true variable speed (inverter duty)
Maintenance free and service-friendly design - Chimney System, Heating
Enervex MODS
Demand controlled exhaust system that’s designed for buildings that experience excessive chimney draft
Full modulation and 100% over-draft control
Integrated safety system with Proven Draft function, over-pressure cut-out switch and operation verification
Priority Operation Function and Bearing Cycle Activation
Interlocks 6 appliances (standard) or as many as necessary with add-on boards
Multi-blade damper for fast and accurate draft control
Fast-acting, direct drive actuator with brushless motor
Maintenance free and service-friendly design, the MODS System can be combined with a CASV or CASI and an MCAS system - Chimney System, Heating
Enervex PowerStack Chimney Duct System
Industry-only multi-use chimney system with 9 UL listings
Only chimney system listed for use with Category I, II, III and IV appliances
Material Inner Liner: 316L-PCM Stainless Steel
Outer Case: 304 Stainless Steel Insulation Insulfrax 8.14 lbs/cu.ft (128 kg/m3)
Max. Pressure : 60 inWG (14945 Pa)
Max. Temperature1400°F (760°C) per UL2561
Warranty1-Year Warranty / Extended 15-Year Warranty
5-Year Performance and Leakage Guarantee
- Chimney System, Heating
Enervex UVS Ultimate Venting System
PowerStack Chimney System
Flexible, one-stop design eliminates guesswork
Mechanical Draft System (fan-based)
Modulating Overdraft Control System (damper-based)
Modulating Combustion Air Supply System Economizer (Vortex Heat Recovery System)
Guaranteed fit for all parts & components
Fit for any type of building, application or appliance