Fulton
Showing 1–15 of 27 results
-
Heating, Thermal Fluid Boilers
Fulton A-Model
Vertical Design
Heaters are Built and Tested to ASME Code
207,000 BTU/Hr to 1,736,000 BTU/Hr Output
Operating Temperatures to 600° F
Gas or Oil-Fired Burners, On/Off or Modulating
Low Emission Gas Burners are Available
Customized Controls Available
SKU: n/a -
Heating, Thermal Fluid Boilers
Fulton Alliance-Model
Available from 2.4 MBTU/hr to 20MBTU/hr output
Maximum operating temperatures to 650°F
Compact Horizontal 3-Pass Design
Modulating Gas, Oil or Dual Fuel Burners
Low Emission Gas Burners
Alternative Fuel Capabilities
Customized Controls Available
Built and Stamped Per ASME CodeSKU: n/a -
-
Heating, Thermal Fluid Boilers
Fulton C-Model
Vertical 4-Pass Design
Preheated Combustion Air is an Integral Part of the Design
Heaters are Built and Tested to ASME Code
800,000 BTU/Hr to 14,000,000 BTU/Hr Output
Operating Temperatures to 750° F
Gas, Oil or Dual Fuel Burners; On/Off or Modulating
Low Emission Natural Gas Burners are available
Minimal Refractory Results in Low Thermal Inertia and Prevents Overheating of the Fluid in the event of a Pump or Power Failure
Customized Controls Available
Customized Heaters Available
High Efficiencies
Even HeatingSKU: n/a -
-
Heating, Steam Boilers
Fulton Classic (ICS)
Available from 4 to 60 BHP
Vertical tubeless 2-pass design
Top-mounted Fulton burner
Uniform heat distribution for maximum longevity
Small footprint – compact design
Built/Certified to ASME
All hand-welded pressure vessel
Simple, reliable and forgivingSKU: n/a -
Heating, Hydronic Boilers, Non-Condensing Boilers
Fulton Classic (ICW)
Available from 4 to 60 BHP
Simple, Durable and Reliable
Wide Range of Sizes
Small Footprint
Compact Design with the original vertical tubeless down-fired design
Supplying steam and hot water to virtually every type of industry imaginable
Compatible with oil and/or gas capabilities with low emissions burners (gas only)SKU: n/a -
Heating, Steam Boilers
Fulton Edge (ICX)
Available from 6 to 30 BHP
Efficiency up to 84%
Same vertical tubeless 2-pass design as our Classic boiler
Additional Flue Gas Enhancing System to maximize efficiency
Top mounted burner for even heat distribution
Small footprint – compact design
Built/Certified to ASME, CSD-1 and other applicable codes, UL Packaged Boiler
All hand-welded pressure vessel
Stainless steel jacketSKU: n/a -
Electric Boilers, Heating, Hydronic Boilers
Fulton Electric Hot Water Boiler
Available from 1.2 to 100 BHP
ASME/CSD-1/UL Approval with 120V controls
Stainless steel elements
Nema 1 Panel box with controls
Control circuit step-down transformer
Magnetic element contactors
Element sequence controller on 10.5 – 100 HP
Power door interlock
On/Off activation switch
Painted carbon steel jacket
Operating limit temperature control with auto reset
High limit temperature control with manual resetSKU: n/a -
-
Heating, Steam Boilers
Fulton Electric Steam (FB-L)
Available from 1.2 to 100 BHP
ASME/CSD-1/UL Approval with 120V controls
Stainless steel elements
Nema 1 Panel box with controls
Control circuit step-down transformer
Magnetic element contactors
Element sequence controller on 10 – 100 HP
Power door interlock
On/Off activation switch
Low water light
Painted carbon steel jacket
Probe type level control and gauge glass assembly
Primary LWCO with manual reset
Operating limit temperature control with auto reset
High limit temperature control with manual resetSKU: n/a -
Condensing Boilers, Heating, Hydronic Boilers
Fulton Endura (EDR)
Available from 750,000BTU/hr to 2MBTU/hr
Fully Condensing Ultra-High Efficiency Design
Enhanced Duplex Stainless Steel Heat Exchanger
Primary/Variable Flow Hydronic System Applications
Dual Element Supply Water Temperature Sensor and Return Water Temperature Sensor
Low Water Cut Off Probe with Manual Reset
Fulton SOLA Flame Safeguard, Temperature and Lead/Lag Controller
Large 7” HD Color Touch-Screen DisplaySKU: n/a -
Condensing Boilers, Heating, Hydronic Boilers
Fulton Endura+ (EDR+)
Available from 2.5MBTU/hr tp 3MBTU/hr
Built with Duplex Stainless-steel Heat exchanger
Variable Primary-Flow Design
Thermal Stresses Virtually Eliminated
Up to 15:1 Turndown; O2 Compensation
Smaller flue diameters; longer vent runs
Fits Through a Standard Doorway
Lifetime thermal shock warrantySKU: n/a -
Heating, Steam Boiler Accessories
Fulton Feed Sets / Return Tanks
Fulton condensate return systems are completely assembled with tank, stand, high pressure pump, motor,
strainer, float valve, shut-off valve, gauge glass assembly, with overflow and drain openings
Both the horizontal and the vertical condensate return systems are available in heavy gauge “long lasting” steel onlySKU: n/a -
Heating, Thermal Fluid Boilers
Fulton Hopkins-Model
Horizontal 2-Pass Design
1,000,000 BTU/Hr to 40,000,000 BTU/Hr Output
Heaters are Built and Tested to ASME Code, Section VIII Div. I as standard. ASME Code Section I is available upon request
Operating Temperatures to 650° F
Modulating Gas, Oil or Dual Fuel Burners
Alternative Fuel Capabilities
Open Protocol Burner
Skid-Mounted Systems Available, Including Circulating Pump and Expansion Tank
Customized Controls and Coil Designs Available
Water – Glycol Heaters Available
Available with or without Integral Expansion TankSKU: n/a
